Epitech/T-MAJ-800_msc2024
4
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

gatway WIP

Browse Source
This commit is contained in:
Clement 2023-07-18 10:29:52 +02:00
parent 2824c4da04
commit 95f252768f
7 changed files with 79 additions and 419 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

59
IOT/receiver LoRa/config.ini
View File

@ -14,6 +14,65 @@ build_flags =
-D MONITOR_SPEED=${config.monitor_speed}
; DO NOT TOUCH --- END
;;; FDRS config
-D FDRS_DEBUG ; Enable USB-Serial debugging
; Addresses
-D UNIT_MAC=0x01
-D ESPNOW_NEIGHBOR_1=0x00
-D ESPNOW_NEIGHBOR_2=0x02
-D LORA_NEIGHBOR_1=0x00
-D LORA_NEIGHBOR_2=0x03
; Interfaces
; -D USE_ESPNOW
-D USE_LORA
; -D USE_WIFI
; -D USE_ETHERNET
; Routing is in main.cpp
; LoRa Configuration
-D RADIOLIB_MODULE=SX1276
-D LORA_SS=18
-D LORA_RST=14
-D LORA_DIO=26
-D LORA_BUSY=RADIOLIB_NC
; -D USE_SX126X
-D LORA_TXPWR=17 ; LoRa TX power in dBm (: +2dBm - +17dBm (for SX1276-7) +20dBm (for SX1278))
-D CUSTOM_SPI
-D LORA_SPI_SCK=5
-D LORA_SPI_MISO=19
-D LORA_SPI_MOSI=27
-D LORA_FREQUENCY=433.0
; OLED -- Displays console debugging messages on an SSD1306 I²C OLED
; -D USE_OLED
-D OLED_HEADER=\"FDRS\"
-D OLED_PAGE_SECS=30
-D OLED_SDA=4
-D OLED_SCL=15
-D OLED_RST=16
; UART data interface pins (if available)
-D RXD2=13
-D TXD2=12
; -D USE_LR ; Use ESP-NOW LR mode (ESP32 only)
; WiFi Credentials
; -D WIFI_SSID=\"Your SSID\"
; -D WIFI_PASS=\"Your Password\"
; LoRa pinout
-D RADIO_MOSI_PIN=27
-D RADIO_MISO_PIN=19

22
IOT/receiver LoRa/include/Program.h
View File

@ -1,22 +0,0 @@
#ifndef PROGRAM_H
#define PROGRAM_H
#include <Arduino.h>
#include <LoRa.h>
#include <SPI.h>
#include <Wire.h>
class Program {
public:
/**
* Program startup
*/
Program();
/**
* Program main loop
*/
void loop();
};
#endif

70
IOT/receiver LoRa/include/boards.h
View File

@ -1,70 +0,0 @@
#include <Arduino.h>
#include <SPI.h>
#include <Wire.h>
//#include "utilities.h"
#ifdef HAS_DISPLAY
#include <U8g2lib.h>
#ifndef DISPLAY_MODEL
#define DISPLAY_MODEL U8G2_SSD1306_128X64_NONAME_F_HW_I2C
#endif
DISPLAY_MODEL *u8g2;
#endif
#ifndef OLED_WIRE_PORT
#define OLED_WIRE_PORT Wire
#endif
SPIClass SDSPI(HSPI);
void initBoard()
{
Serial.begin(115200);
Serial.println("initBoard");
SPI.begin(RADIO_SCLK_PIN, RADIO_MISO_PIN, RADIO_MOSI_PIN);
Wire.begin(I2C_SDA, I2C_SCL);
#ifdef HAS_DISPLAY
Wire.beginTransmission(0x3C);
if (Wire.endTransmission() == 0) {
Serial.println("Started OLED");
u8g2 = new DISPLAY_MODEL(U8G2_R0, U8X8_PIN_NONE);
u8g2->begin();
u8g2->clearBuffer();
u8g2->setFlipMode(0);
u8g2->setFontMode(1); // Transparent
u8g2->setDrawColor(1);
u8g2->setFontDirection(0);
u8g2->firstPage();
do {
u8g2->setFont(u8g2_font_inb19_mr);
u8g2->drawStr(0, 30, "LilyGo");
u8g2->drawHLine(2, 35, 47);
u8g2->drawHLine(3, 36, 47);
u8g2->drawVLine(45, 32, 12);
u8g2->drawVLine(46, 33, 12);
u8g2->setFont(u8g2_font_inb19_mf);
u8g2->drawStr(58, 60, "LoRa");
} while ( u8g2->nextPage() );
u8g2->sendBuffer();
u8g2->setFont(u8g2_font_fur11_tf);
delay(3000);
}
#endif
#ifdef HAS_DISPLAY
if (u8g2) {
u8g2->clearBuffer();
do {
u8g2->setCursor(0, 16);
u8g2->println( "Waiting to receive data");;
} while ( u8g2->nextPage() );
}
#endif
}

195
IOT/receiver LoRa/include/utilities.h
View File

@ -1,195 +0,0 @@
#pragma once
/*
* arduinoLoRa Library just only support SX1276/Sx1278,Not support SX1262
* RadioLib Library supports also SX1262/SX1268 see https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/tree/master/examples/RadioLibExamples
* */
// #define LILYGO_TBeam_V0_7
// #define LILYGO_TBeam_V1_X
// #define LILYGO_T3_V1_0
#define LILYGO_T3_V1_3
// #define LILYGO_T3_V1_6
// #define LILYGO_T3_V2_0
// #define LILYGO_T95_V1_0
/*
* if you need to change it,
* please open this note and change to the frequency you need to test
* Option: 433E6,470E6,868E6,915E6
* */
#define LoRa_frequency 433E6
#define UNUSE_PIN (0)
#if defined(LILYGO_TBeam_V0_7)
#define GPS_RX_PIN 12
#define GPS_TX_PIN 15
#define BUTTON_PIN 39
#define BUTTON_PIN_MASK GPIO_SEL_39
#define I2C_SDA 21
#define I2C_SCL 22
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define BOARD_LED 14
#define LED_ON HIGH
#define LED_OFF LOW
#define GPS_BAUD_RATE 9600
#define HAS_GPS
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
#elif defined(LILYGO_TBeam_V1_X)
#define GPS_RX_PIN 34
#define GPS_TX_PIN 12
#define BUTTON_PIN 38
#define BUTTON_PIN_MASK GPIO_SEL_38
#define I2C_SDA 21
#define I2C_SCL 22
#define PMU_IRQ 35
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define BOARD_LED 4
#define LED_ON LOW
#define LED_OFF HIGH
#define GPS_BAUD_RATE 9600
#define HAS_GPS
#define HAS_DISPLAY //Optional, bring your own board, no OLED !!
#elif defined(LILYGO_T3_V1_0)
#define I2C_SDA 4
#define I2C_SCL 15
#define OLED_RST 16
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_3)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define ADC_PIN 35
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V1_6)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 23
#define RADIO_DIO1_PIN 33
#define RADIO_BUSY_PIN 32
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 25
#define LED_ON HIGH
#define ADC_PIN 35
#define HAS_SDCARD
#define HAS_DISPLAY
#elif defined(LILYGO_T3_V2_0)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 5
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 27
#define RADIO_CS_PIN 18
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 14
#define RADIO_DIO1_PIN UNUSE_PIN
#define RADIO_BUSY_PIN UNUSE_PIN
#define SDCARD_MOSI 15
#define SDCARD_MISO 2
#define SDCARD_SCLK 14
#define SDCARD_CS 13
#define BOARD_LED 0
#define LED_ON LOW
#define HAS_DISPLAY
#define HAS_SDCARD
#elif defined(LILYGO_T95_V1_0)
#define I2C_SDA 21
#define I2C_SCL 22
#define OLED_RST UNUSE_PIN
#define RADIO_SCLK_PIN 18
#define RADIO_MISO_PIN 19
#define RADIO_MOSI_PIN 23
#define RADIO_CS_PIN 5
#define RADIO_DIO0_PIN 26
#define RADIO_RST_PIN 4
#define RADIO_DIO1_PIN 33
#define RADIO_DIO2_PIN 32
#define RADIO_BUSY_PIN UNUSE_PIN
#define ADC_PIN 35
#define HAS_DISPLAY
#else
#error "For the first use, please define the board version and model in <utilities. h>"
#endif

5
IOT/receiver LoRa/platformio.ini
View File

@ -52,8 +52,9 @@ upload_speed = 921600
lib_deps =
; example:
; erropix/ESP32 AnalogWrite@0.2
sandeepmistry/LoRa@^0.8.0 ;LoRa lib
olikraus/U8g2@^2.34.22 ;Oled Lib
https://github.com/timmbogner/Farm-Data-Relay-System.git ;lib for global system architecture
jgromes/RadioLib@^6.1.0 ;lib for comunication
; Checker settings
check_tool = clangtidy, cppcheck

22
IOT/receiver LoRa/src/Program.cpp
View File

@ -1,22 +0,0 @@
#include "Program.h"
Program::Program() {
// Startup
Serial.begin(MONITOR_SPEED);
Serial.println("initBoard");
SPI.begin(RADIO_SCLK_PIN, RADIO_MISO_PIN, RADIO_MOSI_PIN); //for LoRa module
Wire.begin(I2C_SDA, I2C_SCL);//for oled screen
// When the power is turned on, a delay is required.
delay(1500);
//init LoRa
LoRa.setPins(RADIO_CS_PIN, RADIO_RST_PIN, RADIO_DIO0_PIN);
if (!LoRa.begin(LoRa_frequency)) {
Serial.println("Starting LoRa failed!");
while (1);
}
}
void Program::loop() {
// Loop
}

125
IOT/receiver LoRa/src/main.cpp
View File

@ -1,115 +1,24 @@
// #include "Program.h"
// Program* program;
// void setup() {
// program = new Program();
// }
// void loop() {
// program->loop();
// }
#include <LoRa.h>
#include "boards.h"
// FARM DATA RELAY SYSTEM
//
// GATEWAY 2.000
//
// Developed by Timm Bogner (timmbogner@gmail.com) in Urbana, Illinois, USA.
//
#include <Arduino.h>
#include <SPI.h>
#include <fdrs_gateway.h>
void setup()
{
initBoard();
// When the power is turned on, a delay is required.
delay(1500);
// Routing
// Options: sendESPNowNbr(1 or 2); sendESPNowPeers(); sendLoRaNbr(1 or 2); broadcastLoRa(); sendSerial(); sendMQTT();
#define ESPNOWG_ACT sendSerial();
#define LORAG_ACT sendSerial();
Serial.println("LoRa Receiver");
LoRa.setPins(RADIO_CS_PIN, RADIO_RST_PIN, RADIO_DIO0_PIN);
if (!LoRa.begin(LoRa_frequency)) {
Serial.println("Starting LoRa failed!");
while (1);
}
void setup() {
beginFDRS();
}
void loop()
{
// try to parse packet
int packetSize = LoRa.parsePacket();
if (packetSize) {
// received a packet
Serial.print("Received packet '");
String recv = "";
// read packet
while (LoRa.available()) {
recv += (char)LoRa.read();
}
Serial.println(recv);
// print RSSI of packet
Serial.print("' with RSSI ");
Serial.println(LoRa.packetRssi());
#ifdef HAS_DISPLAY
if (u8g2) {
u8g2->clearBuffer();
char buf[256];
u8g2->drawStr(0, 12, "Received OK!");
u8g2->drawStr(0, 26, recv.c_str());
snprintf(buf, sizeof(buf), "RSSI:%i", LoRa.packetRssi());
u8g2->drawStr(0, 40, buf);
snprintf(buf, sizeof(buf), "SNR:%.1f", LoRa.packetSnr());
u8g2->drawStr(0, 56, buf);
u8g2->sendBuffer();
}
#endif
}
}
// #define HAS_DISPLAY
// #include <LoRa.h>
// #include "boards.h"
// int counter = 0;
// void setup()
// {
// initBoard();
// // When the power is turned on, a delay is required.
// delay(1500);
// Serial.println("LoRa Sender");
// LoRa.setPins(RADIO_CS_PIN, RADIO_RST_PIN, RADIO_DIO0_PIN);
// if (!LoRa.begin(LoRa_frequency)) {
// Serial.println("Starting LoRa failed!");
// while (1);
// }
// }
// void loop()
// {
// Serial.print("Sending packet: ");
// Serial.println(counter);
// // send packet
// LoRa.beginPacket();
// LoRa.print("hello ");
// LoRa.print(counter);
// LoRa.endPacket();
// #ifdef HAS_DISPLAY
// if (u8g2) {
// char buf[256];
// u8g2->clearBuffer();
// u8g2->drawStr(0, 12, "Transmitting: OK!");
// snprintf(buf, sizeof(buf), "Sending: %d", counter);
// u8g2->drawStr(0, 30, buf);
// u8g2->sendBuffer();
// }
// #endif
// counter++;
// delay(10000);
// }
void loop() {
loopFDRS();
}